fsd服务器搭建教程：IT运维实战篇NFSKeepalived高可用集群部署discuz论坛网站
fsd服务器搭建教程：IT运维实战篇NFSKeepalived高可用集群部署discuz论坛网站NFS Keepalived（备）：192.168.8.10NFS Keepalived（主）：192.168.8.9LAP：192.168.8.2LAP1：192.168.8.3MYSQL：192.168.8.5
NFS（Network File System）是一个网络文件系统，是Linux系统直接支持文件共享的一直文件系统，它允许网络中的计算机之间通过TCP/IP网络共享资源。在NFS的应用中，本地NFS的客户端应用可以透明地读写位于远端NFS服务器上的文件，就像访问本地文件一样。一般NFS为单击部署，而NFS服务器主要用于存放企业重要数据，此时为了能保证数据的安全可靠，需要对NFS服务器实现同步 keepalived高可用满足企业业务需求，如下为NFS keepalived高可用架构实现步骤：
系统环境：Centos6.9
架构：
LAP Discuz MYSQL NFS Keepalived
LAP：192.168.8.2
LAP1：192.168.8.3
MYSQL：192.168.8.5
NFS Keepalived（主）：192.168.8.9
NFS Keepalived（备）：192.168.8.10
实战操作如下：
LAP端跟LAP1端，执行以下命令
[root@localhost ~]# yum -y install httpd httpd-devel php php-mysql php-devel nfs-utils
MYSQL端，执行以下命令
[root@localhost ~]# yum -y install mysql mysql-devel mysql-server
NFS（主）端和NFS（备）端，执行以下命令
1
4）创建NFS配置文件，启动NFS服务
[root@localhost upload]# echo "/data/www *(rw sync no_root_squash)" >/etc/exports
[root@localhost upload]# cat /etc/exports
[root@localhost upload]# service rpcbind start
[root@localhost upload]# service nfs start
2
MYSQL端
1）启动MYSQL服务
[root@localhost ~]# service mysqld start
2）进入MYSQL命令行终端
[root@localhost ~]# mysql
3）创建Discuz库并授权
mysql> create database discuz charset=utf8;
mysql> grant all on discuz.* to bbs@'192.168.8.2' identified by '123456';
mysql> grant all on discuz.* to bbs@'192.168.8.3' identified by '123456';
mysql> flush privileges;
3
LAP端
1）查看NFS服务器挂载情况
[root@localhost ~]# showmount -e 192.168.8.9
2）挂载NFS服务器共享目录到Apache发布目录（/var/www/html）
[root@localhost ~]# mount -t nfs 192.168.8.9:/data/www /var/www/html
[root@localhost ~]# df -h
4
3）启动Apache服务
[root@localhost ~]# service httpd start
4）打开浏览器访问本机IP，配置Discuz论坛
5
5）点击我同意，出现如下图
6
6）授权
[root@localhost ~]# cd /var/www/html/
[root@localhost html]# chmod o w config/ data/ uc_* -R
7
7）点击下一步
8
8）输入数据库服务器地址、数据库名、数据库用户名、数据库密码，点击下一步
9
10
11
论坛搭建成功~~~~
LAP1端
只需使用mount命令即可
1）挂载NFS服务器共享目录到Apache发布目录（/var/www/html）
[root@localhost ~]# mount -t nfs 192.168.8.9:/data/www /var/www/html
[root@localhost ~]# df –h
2）启动Apache服务
[root@localhost ~]# service httpd start
12
3）打开浏览器访问本机IP，如下图
13
NFS Keepalived（主）部署
1）安装keepalived所需要的依赖包
yum -y install openssl openssl-devel popt-devel kernel-devel gcc gcc-c libnl libnl-devel libnfnetlink-devel popt wget
2）下载keepalived软件包
wget -c http://www.keepalived.org/software/keepalived-1.2.15.tar.gz
3）解压
tar zxf keepalived-1.2.15.tar.gz
cd keepalived-1.2.15
4）预编译keepalived
./configure --prefix=/usr/local/keepalived --with-kernel-dir=/usr/src/kernels/2.6.32-696.16.1.el6.x86_64
5）编译、安装keepalived
make && make install
6）创建软连接，拷贝相应的文件
ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d
chkconfig --add keepalived
chkconfig keepalived on
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
7）编辑keepalived（主）配置文件
编辑vim /etc/keepalived/keepalived.conf，配置内容如下
! Configuration File for keepalived global_defs { notification_email { 123@qq.com } notification_email_from 123@qq.com smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_script chk_nfs { script "/data/shell/check_nfs.sh" interval 2 weight 2 } vrrp_instance VI_1 { state MASTER interface eth0 virtual_router_id 51 mcast_src_ip 192.168.8.9 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.8.99 } track_script { chk_nfs } }
保存退出，启动keepalived服务
[root@localhost ~]# service keepalived start
14
NFS Keepalived（备）部署
1）创建共享目录
[root@localhost ~]# mkdir -p /data/www
2）拷贝NFS服务器（主）论坛代码
[root@localhost ~]# scp -r root@192.168.8.9:/data/www/* /data/www
3）创建NFS配置文件
[root@localhost ~]# echo "/data/www *(rw sync no_root_squash)" >/etc/exports
4）安装keepalived所需要的依赖包
yum -y install openssl openssl-devel popt-devel kernel-devel gcc gcc-c libnl libnl-devel libnfnetlink-devel popt wget
5）下载keepalived软件包
wget -c http://www.keepalived.org/software/keepalived-1.2.15.tar.gz
6）解压
tar zxf keepalived-1.2.15.tar.gz
cd keepalived-1.2.15
7）预编译keepalived
./configure --prefix=/usr/local/keepalived --with-kernel-dir=/usr/src/kernels/2.6.32-696.16.1.el6.x86_64
8）编译、安装keepalived
make && make install
9）创建软连接，拷贝相应的文件
ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d
chkconfig --add keepalived
chkconfig keepalived on
mkdir /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
10）编辑keepalived（主）配置文件
编辑vim /etc/keepalived/keepalived.conf，配置内容如下
! Configuration File for keepalived global_defs { notification_email { 123@qq.com } notification_email_from 123@qq.com smtp_server 127.0.0.1 smtp_connect_timeout 30 router_id LVS_DEVEL } vrrp_script chk_nfs { script "/data/shell/check_nfs.sh" interval 2 weight 2 } vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 51 mcast_src_ip 192.168.8.10 priority 99 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.8.99 } track_script { chk_nfs } }
保存退出~~~
11）启动keepalived服务、NFS服务
[root@localhost ~]# service keepalived start
[root@localhost ~]# service rpcbind start
[root@localhost ~]# service nfs start
12）LAP端跟LAP1端分别重新挂载NFS共享目录（VIP），执行以下命令
[root@localhost ~]# umount /var/www/html
[root@localhost ~]# mount -t nfs 192.168.8.99:/data/www /var/www/html
15
13）分别访问LAP和LAP1
16
17
14）分别在NFS主和备机器上编写主备切换脚本，实现当主（备）的NFS服务宕机自动切换到备（主）机器上
[root@localhost ~]# mkdir -p /data/shell
[root@localhost ~]# vim /data/shell/check_nfs.sh，脚本内容如下
#!/bin/bash #auto check nfs process NUM=`ps -ef |grep nfs|grep -v grep|grep -v check|wc -l` if [[ $NUM -eq 0 ]];then /etc/init.d/keepalived stop fi
[root@localhost ~]# chmod o x /data/shell/check_nfs.sh
15）实验测试
正常运行，VIP在NFS主机器上，当NFS服务器宕机之后自动漂移到备机器上，如下图
18
19
16）但是打开论坛是出现403，如下图
20
17）需要umount /var/www/html，再执行mount -t nfs 192.168.8.99:/data/www /var/www/html，chmod o w data/ config/ uc_* -R即可
21
到此结束，谢谢支持
