只有黑笔怎么画奔驰？光说不练假把式
只有黑笔怎么画奔驰？光说不练假把式样式代码：setBackgroundColor(QColor(255 85 0)); setFontColor(Qt::black); setScaleColor(Qt::yellon); setIndicatorColor(Qt::green);样式4：样式代码：setBackgroundColor(Qt::black); setFontColor(Qt::green); setScaleColor(QColor(255 85 0)); setIndicatorColor(QColor(0 0 255));样式3：样式代码：
前面一共花了几天的时间完成了QPainter类参考文档的翻译，工欲善其事，必先利其器。既然我们已经把准备工作做完了，那就绘制几个小控件试试手，刚好可以丰富一下我们的组件库。先来看一下实现效果：
样式1：
样式代码：
setBackgroundColor(QColor(20 20 20)); //背景
setFontColor(QColor(255 255 255)); //文字
setScaleColor(QColor(255 255 255)); //刻度
setIndicatorColor(QColor(255 255 255)); //指针
样式2：
样式代码：
setBackgroundColor(Qt::black);
setFontColor(Qt::green);
setScaleColor(QColor(255 85 0));
setIndicatorColor(QColor(0 0 255));
样式3：
样式代码：
setBackgroundColor(QColor(255 85 0));
setFontColor(Qt::black);
setScaleColor(Qt::yellon);
setIndicatorColor(Qt::green);
样式4：
样式代码：
setBackgroundColor(QColor(175 255 175));
setFontColor(QColor(255 85 0));
setScaleColor(QColor(128 0 128));
setIndicatorColor(QColor(255 175 175));
换一个指针样式：
#ifndef Dashboard_H
#define DASHBOARD_H
#include <QWidget>
#include <QTimerEvent>
#define SIDE_LENGTH 200
#define ZH_CN(x) QString::fromLocal8Bit(x)
#define SCALE_NUM 28 //0-28总共29个刻度
//仪表盘类
class Dashboard : public QWidget
{
Q_OBJECT
public:
Dashboard(QWidget *parent = 0);
~Dashboard();
void paintEvent(QPaintEvent *event);
void drawBackground(QPainter *painter);
void drawScale(QPainter *painter);
void drawnumber(QPainter *painter);
void drawIndicator(QPainter *painter);
void drawText(QPainter *painter);
void timerEvent(QTimerEvent *event);
void setBackgroundColor(QColor color);
void setFontColor(QColor color);
void setScaleColor(QColor color);
void setIndicatorColor(QColor color);
public slots:
void speedChanged(int nSpeed);
private:
int m_nRadius; //外圆半径
int m_nStartAngle; //起始角度
int m_nSpeed; //速度
QColor m_BackgroundColor; //背景颜色
QColor m_FontColor; //字体颜色
QColor m_ScaleColor; //刻度颜色
QColor m_IndicatorColor; //指针颜色
int m_nTimerId; //定时器Id
bool m_bAdd; //模拟数据使用
};
#endif // DASHBOARD_H
重绘无非就是重写paintEvent()函数，也必须在这里，这一点之前的文档里面也说得很清楚了。
//重写绘制函数
void Dashboard::paintEvent(QPaintEvent *event)
{
Q_UNUSED(event);
QPainter painter(this);
painter.setRenderHint(QPainter::Antialiasing); //开启反锯齿
painter.translate(this->width() / 2 this->height() / 2); //将坐标原点平移到到窗口正中心
//等比例缩放，保证m_nRadius不变的情况下，圆的大小随窗口的大小自适应
int nSideLen = qMin(this->width() this->height()); //获取较短边的边长，外圆直径就等于较短边边长
painter.scale(nSideLen / (SIDE_LENGTH * 1.0) nSideLen / (SIDE_LENGTH * 1.0));
drawBackground(&painter); //绘制背景
drawScale(&painter); //绘制刻度
drawNumber(&painter); //绘制数字
drawIndicator(&painter); //绘制指针
drawText(&painter); //绘制文本
}
//绘制背景
void Dashboard::drawBackground(QPainter *painter)
{
painter->save();
painter->setPen(Qt::NoPen); //不绘制边框
//绘制外圆
painter->setBrush(m_BackgroundColor);
painter->drawEllipse(QPointF(0 0) m_nRadius m_nRadius);
painter->restore();
}
//绘制刻度
void Dashboard::drawScale(QPainter *painter)
{
double dbLineWidth = 1.0;
painter->save();
painter->rotate(m_nStartAngle);
double dbRotate = (double)(360 - (m_nStartAngle * 2)) / (SCALE_NUM * 5);
for (int i = 0; i <= SCALE_NUM * 5; i )
{
painter->setPen(QPen(m_ScaleColor dbLineWidth));
if (i % 5 == 0) //绘制大刻度
painter->drawLine(QPointF(0 m_nRadius) QPointF(0 m_nRadius * 0.9));
else //绘制小刻度
painter->drawLine(QPointF(0 m_nRadius) QPointF(0 m_nRadius * 0.95));
painter->rotate(dbRotate);
}
painter->restore();
}
//绘制数字
void Dashboard::drawNumber(QPainter *painter)
{
painter->save();
int nRadius = (int)(m_nRadius * 0.78);
painter->setFont(QFont("Arial" 10));
painter->setPen(QPen(m_FontColor));
QFontMetricsF fm = QFontMetricsF(painter->font());
double dbRotate = (double)(360 - (m_nStartAngle * 2)) / (SCALE_NUM * 5);
for (int i=0; i<=SCALE_NUM * 5; i )
{
if (i % 10 == 0)
{
int nAngle = 90 m_nStartAngle dbRotate * i;
float fAngleArc = (nAngle % 360) * M_PI / 180;
int x = nRadius * cos(fAngleArc);
int y = nRadius * sin(fAngleArc);
QString strNumber = QString::number(i * 2);
int w = (int)fm.width(strNumber);
int h = (int)fm.height();
x = x - w / 2;
y = y h / 4;
painter->drawText(QPointF(x y) strNumber);
}
}
painter->restore();
}
//绘制指针
void Dashboard::drawIndicator(QPainter *painter)
{
painter->save();
QPolygon polygon;
int nRadius = m_nRadius * 0.9;
polygon << QPoint(-3 0) << QPoint(3 0) << QPoint(0 nRadius);
double dbRotate = (double)(360 - (m_nStartAngle * 2)) / (SCALE_NUM * 5);
dbRotate = dbRotate * (m_nSpeed / 2) m_nStartAngle;
//画指针
painter->rotate(dbRotate);
painter->setPen(Qt::NoPen);
painter->setBrush(m_IndicatorColor);
painter->drawConvexPolygon(polygon);
painter->restore();
// 画中心圆圈
painter->save();
painter->setPen(Qt::NoPen);
painter->setBrush(m_IndicatorColor);
painter->drawEllipse(QPointF(0 0) 7 7);
painter->restore();
}
//绘制文本
void Dashboard::drawText(QPainter *painter)
{
painter->save();
painter->setFont(QFont("Arial" 20 QFont::Bold));
painter->setPen(QPen(m_FontColor));
QFontMetricsF fm = QFontMetricsF(painter->font());
//绘制速度
QString strNumber = QString::number(m_nSpeed);
int w = (int)fm.width(strNumber);
int h = (int)fm.height();
int x = 0 - w / 2;
int y = 30 h / 4;
painter->drawText(QPointF(x y) strNumber);
//绘制单位
painter->setFont(QFont("Arial" 10));
fm = QFontMetricsF(painter->font());
QString strUnit = "km/h";
w = (int)fm.width(strUnit);
h = (int)fm.height();
x = 0 - w / 2;
y = 55 h / 4;
painter->drawText(QPointF(x y) strUnit);
painter->restore();
}
其他接口函数无非就是赋值操作，大家自行实现，这里就不贴代码了，觉得还有点意思的朋友，点个关注，点个赞支持一下。
