快捷搜索：  汽车  科技
当前位置： 爱玩科技 > 图文 > 正文

kubernetes调整策略（使用kubeadm部署Kubernetes1.22）

逗爷 506

kubernetes调整策略（使用kubeadm部署Kubernetes1.22）cat << EOF > /etc/sysctl.d/99-kubernetes-cri.conf net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 net.ipv4.ip_forward = 1 user.max_user_namespaces=28633 EOF执行以下命令使配置生效:modprobe overlay modprobe br_netfilter创建/etc/sysctl.d/99-kubernetes-cri.conf配置文件：禁用SELINUX：setenforce 0vi /etc/selinux/config SELINUX=disabled创建/etc/modules-load.d/containerd.conf配置文件: 创建/etc

kubeadm是Kubernetes官方提供的用于快速安部署Kubernetes集群的工具，伴随Kubernetes每个版本的发布都会同步更新，kubeadm会对集群配置方面的一些实践做调整，通过实验kubeadm可以学习到Kubernetes官方在集群配置上一些新的最佳实践。

1.准备1.1 系统配置

在安装之前，需要先做好如下准备。3台CentOS 7.9主机如下：

cat /etc/hosts 192.168.96.151 node1 192.168.96.152 node2 192.168.96.153 node3

在各个主机上完成下面的系统配置。

如果各个主机启用了防火墙策略，需要开放Kubernetes各个组件所需要的端口，可以查看Installing kubeadm中的"Check required ports"一节开放相关端口或者关闭主机的防火墙。

禁用SELINUX：

setenforce 0

vi /etc/selinux/config SELINUX=disabled创建/etc/modules-load.d/containerd.conf配置文件:

创建/etc/modules-load.d/containerd.conf配置文件:

cat << EOF > /etc/modules-load.d/containerd.conf overlay br_netfilter EOF

执行以下命令使配置生效:

modprobe overlay modprobe br_netfilter

创建/etc/sysctl.d/99-kubernetes-cri.conf配置文件：

cat << EOF > /etc/sysctl.d/99-kubernetes-cri.conf net.bridge.bridge-nf-call-ip6tables = 1 net.bridge.bridge-nf-call-iptables = 1 net.ipv4.ip_forward = 1 user.max_user_namespaces=28633 EOF

执行以下命令使配置生效:

sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf1.2 配置服务器支持开启ipvs的前提条件

由于ipvs已经加入到了内核的主干，所以为kube-proxy开启ipvs的前提需要加载以下的内核模块：

ip_vs ip_vs_rr ip_vs_wrr ip_vs_sh nf_conntrack_ipv4

在各个服务器节点上执行以下脚本:

cat > /etc/sysconfig/modules/ipvs.modules <<EOF #!/bin/bash modprobe -- ip_vs modprobe -- ip_vs_rr modprobe -- ip_vs_wrr modprobe -- ip_vs_sh modprobe -- nf_conntrack_ipv4 EOF chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

上面脚本创建了的/etc/sysconfig/modules/ipvs.modules文件，保证在节点重启后能自动加载所需模块。 使用lsmod | grep -e ip_vs -e nf_conntrack_ipv4命令查看是否已经正确加载所需的内核模块。

接下来还需要确保各个节点上已经安装了ipset软件包，为了便于查看ipvs的代理规则，最好安装一下管理工具ipvsadm。

yum install -y ipset ipadm

如果以上前提条件如果不满足，则即使kube-proxy的配置开启了ipvs模式，也会退回到iptables模式。

1.3 部署容器运行时Containerd

在各个服务器节点上安装容器运行时Containerd。

下载Containerd的二进制包:

wget https://github.com/containerd/containerd/releases/download/v1.5.5/cri-containerd-cni-1.5.5-linux-amd64.tar.gz

cri-containerd-cni-1.5.5-linux-amd64.tar.gz压缩包中已经按照官方二进制部署推荐的目录结构布局好。 里面包含了systemd配置文件，containerd以及cni的部署文件。 将解压缩到系统的根目录/中:

tar -zxvf cri-containerd-cni-1.5.5-linux-amd64.tar.gz -C / etc/ etc/systemd/ etc/systemd/system/ etc/systemd/system/containerd.service etc/crictl.yaml etc/cni/ etc/cni/net.d/ etc/cni/net.d/10-containerd-net.conflist usr/ usr/local/ usr/local/sbin/ usr/local/sbin/runc usr/local/bin/ usr/local/bin/critest usr/local/bin/containerd-shim usr/local/bin/containerd-shim-runc-v1 usr/local/bin/ctd-decoder usr/local/bin/containerd usr/local/bin/containerd-shim-runc-v2 usr/local/bin/containerd-stress usr/local/bin/ctr usr/local/bin/crictl ...... opt/cni/ opt/cni/bin/ opt/cni/bin/bridge ......

接下来生成containerd的配置文件:

mkdir -p /etc/containerd containerd config default > /etc/containerd/config.toml

根据文档Container runtimes 中的内容，对于使用systemd作为init system的Linux的发行版，使用systemd作为容器的cgroup driver可以确保服务器节点在资源紧张的情况更加稳定，因此这里配置各个节点上containerd的cgroup driver为systemd。

修改前面生成的配置文件/etc/containerd/config.toml：

[plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc] ... [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options] Systemdcgroup = true

配置containerd开机启动，并启动containerd

systemctl enable containerd --now

使用crictl测试一下，确保可以打印出版本信息并且没有错误信息输出:

crictl version Version: 0.1.0 RuntimeName: containerd RuntimeVersion: v1.5.5 RuntimeApiVersion: v1alpha2 2.使用kubeadm部署Kubernetes2.1 安装kubeadm和kubelet

下面在各节点安装kubeadm和kubelet：

cat <<EOF > /etc/yum.repos.d/kubernetes.repo [kubernetes] name=Kubernetes baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64 enabled=1 gpgcheck=1 repo_gpgcheck=1 gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg EOF

yum makecache fast yum install kubelet kubeadm kubectl

运行kubelet --help可以看到原来kubelet的绝大多数命令行flag参数都被DEPRECATED了，官方推荐我们使用--config指定配置文件，并在配置文件中指定原来这些flag所配置的内容。具体内容可以查看这里Set Kubelet parameters via a config file。这也是Kubernetes为了支持动态Kubelet配置（Dynamic Kubelet Configuration）才这么做的，参考Reconfigure a Node’s Kubelet in a Live Cluster。

kubelet的配置文件必须是json或yaml格式，具体可查看这里。

Kubernetes 1.8开始要求关闭系统的Swap，如果不关闭，默认配置下kubelet将无法启动。 关闭系统的Swap方法如下:

swapoff -a

修改 /etc/fstab 文件，注释掉 SWAP 的自动挂载，使用free -m确认swap已经关闭。 swappiness参数调整，修改/etc/sysctl.d/99-kubernetes-cri.conf添加下面一行：

vm.swappiness=0

执行sysctl -p /etc/sysctl.d/99-kubernetes-cri.conf使修改生效。

因为这里用于测试3台主机上还运行其他服务，关闭swap可能会对其他服务产生影响，所以这里修改kubelet的配置去掉这个限制。 使用kubelet的启动参数--fail-swap-on=false去掉必须关闭Swap的限制，修改/etc/sysconfig/kubelet，加入：

KUBELET_EXTRA_ARGS=--fail-swap-on=false 2.2 使用kubeadm init初始化集群

在各节点开机启动kubelet服务：

systemctl enable kubelet.service

使用kubeadm config print init-defaults --component-configs KubeletConfiguration可以打印集群初始化默认的使用的配置：

apiVersion: kubeadm.k8s.io/v1beta2 bootstrapTokens: - groups: - system:bootstrappers:kubeadm:default-node-token token: abcdef.0123456789abcdef ttl: 24h0m0s usages: - signing - authentication kind: InitConfiguration localAPIEndpoint: advertiseAddress: 1.2.3.4 bindPort: 6443 nodeRegistration: criSocket: /var/run/dockershim.sock name: node taints: null --- apiServer: timeoutForControlPlane: 4m0s apiVersion: kubeadm.k8s.io/v1beta2 certificatesDir: /etc/kubernetes/pki clusterName: kubernetes controllerManager: {} dns: type: CoreDNS etcd: local: dataDir: /var/lib/etcd imageRepository: k8s.gcr.io kind: ClusterConfiguration kubernetesVersion: 1.21.0 networking: dnsDomain: cluster.local serviceSubnet: 10.96.0.0/12 scheduler: {} --- apiVersion: kubelet.config.k8s.io/v1beta1 authentication: anonymous: enabled: false webhook: cacheTTL: 0s enabled: true x509: clientCAFile: /etc/kubernetes/pki/ca.crt authorization: mode: Webhook webhook: cacheAuthorizedTTL: 0s cacheUnauthorizedTTL: 0s clusterDNS: - 10.96.0.10 clusterDomain: cluster.local cpuManagerReconcilePeriod: 0s evictionPressureTransitionPeriod: 0s fileCheckFrequency: 0s healthzBindAddress: 127.0.0.1 healthzPort: 10248 httpCheckFrequency: 0s imageMinimumGCAge: 0s kind: KubeletConfiguration logging: {} nodeStatusReportFrequency: 0s nodeStatusUpdateFrequency: 0s rotateCertificates: true runtimeRequestTimeout: 0s shutdownGracePeriod: 0s shutdownGracePeriodCriticalPods: 0s staticPodPath: /etc/kubernetes/manifests streamingConnectionIdleTimeout: 0s syncFrequency: 0s volumeStatsAggPeriod: 0s

从默认的配置中可以看到，可以使用imageRepository定制在集群初始化时拉取k8s所需镜像的地址。基于默认配置定制出本次使用kubeadm初始化集群所需的配置文件kubeadm.yaml：

apiVersion: kubeadm.k8s.io/v1beta2 kind: InitConfiguration localAPIEndpoint: advertiseAddress: 192.168.96.151 bindPort: 6443 nodeRegistration: criSocket: /run/containerd/containerd.sock taints: - effect: PreferNoSchedule key: node-role.kubernetes.io/master --- apiVersion: kubeadm.k8s.io/v1beta2 kind: ClusterConfiguration kubernetesVersion: v1.22.0 imageRepository: registry.aliyuncs.com/google_containers networking: podSubnet: 10.244.0.0/16 --- apiVersion: kubelet.config.k8s.io/v1beta1 kind: KubeletConfiguration cgroupDriver: systemd failSwapOn: false --- apiVersion: kubeproxy.config.k8s.io/v1alpha1 kind: KubeProxyConfiguration mode: ipvs

这里定制了imageRepository为阿里云的registry，避免因gcr被墙，无法直接拉取镜像。 同时设置kubelet的cgroupDriver为systemd，设置kube-proxy代理模式为ipvs。

在开始初始化集群之前可以使用kubeadm config images pull --config kubeadm.yaml预先在各个服务器节点上拉取所k8s需要的容器镜像。

kubeadm config images pull --config kubeadm.yaml [config/images] Pulled registry.aliyuncs.com/google_containers/kube-apiserver:v1.22.0 [config/images] Pulled registry.aliyuncs.com/google_containers/kube-controller-manager:v1.22.0 [config/images] Pulled registry.aliyuncs.com/google_containers/kube-scheduler:v1.22.0 [config/images] Pulled registry.aliyuncs.com/google_containers/kube-proxy:v1.22.0 [config/images] Pulled registry.aliyuncs.com/google_containers/pause:3.5 [config/images] Pulled registry.aliyuncs.com/google_containers/etcd:3.5.0-0 failed to pull image "registry.aliyuncs.com/google_containers/coredns:v1.8.4"

上面的命令执行出现了拉取registry.aliyuncs.com/google_containers/coredns:v1.8.4出错，看来阿里云上的镜像也不全，手动pull并tag coredns的镜像:

crictl pull docker.io/coredns/coredns:1.8.4 ctr -n k8s.io i tag docker.io/coredns/coredns:1.8.4 registry.aliyuncs.com/google_containers/coredns:v1.8.4

接下来使用kubeadm初始化集群，选择node1作为Master Node，在node1上执行下面的命令：

kubeadm init --config kubeadm.yaml --ignore-preflight-errors=Swap [init] Using Kubernetes version: v1.22.0 [preflight] Running pre-flight checks [WARNING Swap]: running with swap on is not supported. Please disable swap [preflight] Pulling images required for setting up a Kubernetes cluster [preflight] This might take a minute or two depending on the speed of your internet connection [preflight] You can also perform this action in beforehand using 'kubeadm config images pull' [certs] Using certificateDir folder "/etc/kubernetes/pki" [certs] Generating "ca" certificate and key [certs] Generating "apiserver" certificate and key [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local node1] and IPs [10.96.0.1 192.168.96.151] [certs] Generating "apiserver-kubelet-client" certificate and key [certs] Generating "front-proxy-ca" certificate and key [certs] Generating "front-proxy-client" certificate and key [certs] Generating "etcd/ca" certificate and key [certs] Generating "etcd/server" certificate and key [certs] etcd/server serving cert is signed for DNS names [localhost node1] and IPs [192.168.96.151 127.0.0.1 ::1] [certs] Generating "etcd/peer" certificate and key [certs] etcd/peer serving cert is signed for DNS names [localhost node1] and IPs [192.168.96.151 127.0.0.1 ::1] [certs] Generating "etcd/healthcheck-client" certificate and key [certs] Generating "apiserver-etcd-client" certificate and key [certs] Generating "sa" key and public key [kubeconfig] Using kubeconfig folder "/etc/kubernetes" [kubeconfig] Writing "admin.conf" kubeconfig file [kubeconfig] Writing "kubelet.conf" kubeconfig file [kubeconfig] Writing "controller-manager.conf" kubeconfig file [kubeconfig] Writing "scheduler.conf" kubeconfig file [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env" [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml" [kubelet-start] Starting the kubelet [control-plane] Using manifest folder "/etc/kubernetes/manifests" [control-plane] Creating static Pod manifest for "kube-apiserver" [control-plane] Creating static Pod manifest for "kube-controller-manager" [control-plane] Creating static Pod manifest for "kube-scheduler" [etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests" [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s [kubelet-check] Initial timeout of 40s passed. [apiclient] All control plane components are healthy after 41.504708 seconds [upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace [kubelet] Creating a ConfigMap "kubelet-config-1.22" in namespace kube-system with the configuration for the kubelets in the cluster [upload-certs] Skipping phase. Please see --upload-certs [mark-control-plane] Marking the node node1 as control-plane by adding the labels: [node-role.kubernetes.io/master(deprecated) node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers] [mark-control-plane] Marking the node node1 as control-plane by adding the taints [node-role.kubernetes.io/master:PreferNoSchedule] [bootstrap-token] Using token: wshiiw.o7qsemz81ikc1sfs [bootstrap-token] Configuring bootstrap tokens cluster-info ConfigMap RBAC Roles [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials [bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token [bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster [bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace [kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key [addons] Applied essential addon: CoreDNS [addons] Applied essential addon: kube-proxy Your Kubernetes control-plane has initialized successfully! To start using your cluster you need to run the following as a regular user: mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config Alternatively if you are the root user you can run: export KUBECONFIG=/etc/kubernetes/admin.conf You should now deploy a pod network to the cluster. Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at: https://kubernetes.io/docs/concepts/cluster-administration/addons/ Then you can join any number of worker nodes by running the following on each as root: kubeadm join 192.168.96.151:6443 --token wshiiw.o7qsemz81ikc1sfs \ --discovery-token-ca-cert-hash sha256:dfaf4614301264755955fe577c403aa44017a8425b0c3a234a4991ff4a2f4b59

上面记录了完成的初始化输出的内容，根据输出的内容基本上可以看出手动初始化安装一个Kubernetes集群所需要的关键步骤。 其中有以下关键内容：

  • [certs]生成相关的各种证书
  • [kubeconfig]生成相关的kubeconfig文件
  • [kubelet-start] 生成kubelet的配置文件"/var/lib/kubelet/config.yaml"
  • [control-plane]使用/etc/kubernetes/manifests目录中的yaml文件创建apiserver、controller-manager、scheduler的静态pod
  • [bootstraptoken]生成token记录下来，后边使用kubeadm join往集群中添加节点时会用到
  • 下面的命令是配置常规用户如何使用kubectl访问集群：

mkdir -p $HOME/.kube sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config sudo chown $(id -u):$(id -g) $HOME/.kube/config

  • 最后给出了将节点加入集群的命令kubeadm join 192.168.96.151:6443 --token wshiiw.o7qsemz81ikc1sfs \ --discovery-token-ca-cert-hash sha256:dfaf4614301264755955fe577c403aa44017a8425b0c3a234a4991ff4a2f4b59

查看一下集群状态，确认个组件都处于healthy状态，结果出现了错误:

kubectl get cs Warning: v1 ComponentStatus is deprecated in v1.19 NAME STATUS MESSAGE ERROR controller-manager Unhealthy Get "http://127.0.0.1:10252/healthz": dial tcp 127.0.0.1:10252: connect: connection refused scheduler Unhealthy Get "http://127.0.0.1:10251/healthz": dial tcp 127.0.0.1:10251: connect: connection refused etcd-0 Healthy {"health":"true"}

controller-manager和scheduler为不健康状态，修改/etc/kubernetes/manifests/下的静态pod配置文件kube-controller-manager.yaml和kube-scheduler.yaml，删除这两个文件中命令选项中的- --port=0这行，重启kubelet，再次查看一切正常。

kubectl get cs Warning: v1 ComponentStatus is deprecated in v1.19 NAME STATUS MESSAGE ERROR controller-manager Healthy ok scheduler Healthy ok etcd-0 Healthy {"health":"true"}

集群初始化如果遇到问题，可以使用kubeadm reset命令进行清理：

2.3 安装包管理器helm 3

Helm是Kubernetes的包管理器，后续流程也将使用Helm安装Kubernetes的常用组件。 这里先在master节点node1上按照helm。

wget https://get.helm.sh/helm-v3.6.0-linux-amd64.tar.gz tar -zxvf helm-v3.6.0-linux-amd64.tar.gz mv linux-amd64/helm /usr/local/bin/

执行helm list确认没有错误输出。

2.4 部署Pod Network组件Calico

选择calico作为k8s的Pod网络组件，下面使用helm在k8s集群中按照calico。

下载tigera-operator的helm chart:

wget https://github.com/projectcalico/calico/releases/download/v3.20.0/tigera-operator-v3.20.0-1.tgz

查看这个chart的中可定制的配置:

helm show values tigera-operator-v3.20.0-1.tgz imagePullSecrets: {} installation: enabled: true kubernetesProvider: "" apiServer: enabled: true certs: node: key: cert: commonName: typha: key: cert: commonName: caBundle: # Configuration for the tigera operator tigeraOperator: image: tigera/operator version: v1.20.0 registry: quay.io calicoctl: image: quay.io/docker.io/calico/ctl tag: v3.20.0

定制的values.yaml如下:

# 可针对上面的配置进行定制 这里略过

使用helm安装calico：

helm install calico tigera-operator-v3.20.0-1.tgz -f values.yaml

等待并确认所有pod处于Running状态:

watch kubectl get pods -n calico-system NAME READY STATUS RESTARTS AGE calico-kube-controllers-7f58dbcbbd-kdnlg 1/1 Running 0 2m34s calico-node-nv794 1/1 Running 0 2m34s calico-typha-65f579bc5d-4pbfz 1/1 Running 0 2m34s

查看一下calico向k8s中添加的api资源:

kubectl api-resources | grep calico bgpconfigurations crd.projectcalico.org/v1 false BGPConfiguration bgppeers crd.projectcalico.org/v1 false BGPPeer blockaffinities crd.projectcalico.org/v1 false BlockAffinity clusterinformations crd.projectcalico.org/v1 false ClusterInformation felixconfigurations crd.projectcalico.org/v1 false FelixConfiguration globalnetworkpolicies crd.projectcalico.org/v1 false GlobalNetworkPolicy globalnetworksets crd.projectcalico.org/v1 false GlobalNetworkSet hostendpoints crd.projectcalico.org/v1 false HostEndpoint ipamblocks crd.projectcalico.org/v1 false IPAMBlock ipamconfigs crd.projectcalico.org/v1 false IPAMConfig ipamhandles crd.projectcalico.org/v1 false IPAMHandle ippools crd.projectcalico.org/v1 false IPPool kubecontrollersconfigurations crd.projectcalico.org/v1 false KubeControllersConfiguration networkpolicies crd.projectcalico.org/v1 true NetworkPolicy networksets crd.projectcalico.org/v1 true NetworkSet

这些api资源是属于calico的，因此不建议使用kubectl来管理，推荐按照calicoctl来管理这些api资源。 将calicoctl安装为kubectl的插件:

cd /usr/local/bin curl -o kubectl-calico -O -L "https://github.com/projectcalico/calicoctl/releases/download/v3.20.0/calicoctl" chmod x kubectl-calico

验证插件正常工作:

kubectl calico -h 2.5 验证k8s DNS是否可用

kubectl run curl --image=radial/busyboxplus:curl -it If you don't see a command prompt try pressing enter. [ root@curl:/ ]$

进入后执行nslookup kubernetes.default确认解析正常:

nslookup kubernetes.default Server: 10.96.0.10 Address 1: 10.96.0.10 kube-dns.kube-system.svc.cluster.local Name: kubernetes.default Address 1: 10.96.0.1 kubernetes.default.svc.cluster.local2.6 向Kubernetes集群中添加Node节点

下面将node2 node3添加到Kubernetes集群中，分别在node2 node3上执行:

kubeadm join 192.168.96.151:6443 --token wshiiw.o7qsemz81ikc1sfs \ --discovery-token-ca-cert-hash sha256:dfaf4614301264755955fe577c403aa44017a8425b0c3a234a4991ff4a2f4b59 \ --ignore-preflight-errors=Swap

node2和node3加入集群很是顺利，在master节点上执行命令查看集群中的节点：

kubectl get node NAME STATUS ROLES AGE VERSION node1 Ready control-plane master 15m v1.22.0 node2 Ready <none> 48s v1.22.0 node3 Ready <none> 32s v1.22.03.Kubernetes常用组件部署3.1 使用Helm部署ingress-nginx

为了便于将集群中的服务暴露到集群外部，需要使用Ingress。接下来使用Helm将ingress-nginx部署到Kubernetes上。 Nginx Ingress Controller被部署在Kubernetes的边缘节点上。

这里将node1(192.168.96.151)作为边缘节点，打上Label：

kubectl label node node1 node-role.kubernetes.io/edge=

下载ingress-nginx的helm chart:

wget https://github.com/kubernetes/ingress-nginx/releases/download/helm-chart-4.0.0/ingress-nginx-4.0.0.tgz

查看ingress-nginx-4.0.0.tgz这个chart的可定制配置:

helm show values ingress-nginx-4.0.0.tgz

对values.yaml配置定制如下:

controller: ingressClassResource: name: nginx enabled: true default: true controllerValue: "k8s.io/ingress-nginx" admissionWebhooks: enabled: false replicaCount: 1 image: # registry: k8s.gcr.io # image: ingress-nginx/controller # tag: "v0.48.1" registry: docker.io image: unreachableg/k8s.gcr.io_ingress-nginx_controller tag: "v1.0.0-beta.1" digest: sha256:a8ef07fb3fd569dfc7c4c82cb1ac14275925417caed5aa19c0e4e16a9e76e681 hostNetwork: true nodeSelector: node-role.kubernetes.io/edge: '' affinity: podAntiAffinity: requiredDuringSchedulingIgnoredDuringExecution: - labelSelector: matchExpressions: - key: app operator: In values: - nginx-ingress - key: component operator: In values: - controller topologyKey: kubernetes.io/hostname tolerations: - key: node-role.kubernetes.io/master operator: Exists effect: NoSchedule - key: node-role.kubernetes.io/master operator: Exists effect: PreferNoSchedule

nginx ingress controller的副本数replicaCount为1，将被调度到node1这个边缘节点上。这里并没有指定nginx ingress controller service的externalIPs，而是通过hostNetwork: true设置nginx ingress controller使用宿主机网络。 因为k8s.gcr.io被墙，这里替换成docker.io/bitnami/nginx-ingress-controller提前拉取一下镜像:

crictl pull unreachableg/k8s.gcr.io_ingress-nginx_controller:v1.0.0-beta.1

helm install ingress-nginx ingress-nginx-4.0.0.tgz --create-namespace -n ingress-nginx -f values.yaml

kubectl get pod -n ingress-nginx NAME READY STATUS RESTARTS AGE ingress-nginx-controller-7f574989bc-xwbf4 1/1 Running 0 117s

测试访问http://192.168.96.151返回默认的nginx 404页，则部署完成。

3.2 使用Helm部署dashboard

先部署metrics-server：

wget https://github.com/kubernetes-sigs/metrics-server/releases/download/v0.5.0/components.yaml

修改components.yaml中的image为docker.io/unreachableg/k8s.gcr.io_metrics-server_metrics-server:v0.5.0。 修改components.yaml中容器的启动参数，加入--kubelet-insecure-tls。

kubectl apply -f components.yaml

metrics-server的pod正常启动后，等一段时间就可以使用kubectl top查看集群和pod的metrics信息:

kubectl top node --use-protocol-buffers=true NAME CPU(cores) CPU% MEMORY(bytes) MEMORY% node1 219m 5% 3013Mi 39% node2 102m 2% 1576Mi 20% node3 110m 2% 1696Mi 21% kubectl top pod -n kube-system --use-protocol-buffers=true NAME CPU(cores) MEMORY(bytes) coredns-59d64cd4d4-9mclj 4m 17Mi coredns-59d64cd4d4-fj7xr 4m 17Mi etcd-node1 25m 154Mi kube-apiserver-node1 80m 465Mi kube-controller-manager-node1 17m 61Mi kube-proxy-hhlhc 1m 21Mi kube-proxy-nrhq7 1m 19Mi kube-proxy-phmrw 1m 17Mi kube-scheduler-node1 4m 24Mi kubernetes-dashboard-5cb95fd47f-6lfnm 3m 36Mi metrics-server-9ddcc8ddf-jvlzs 5m 21Mi

接下来使用helm部署k8s的dashboard，添加chart repo:

helm repo add kubernetes-dashboard https://kubernetes.github.io/dashboard/ helm repo update

查看chart的可定制配置:

helm show values kubernetes-dashboard/kubernetes-dashboard

对value.yaml定制配置如下:

image: repository: kubernetesui/dashboard tag: v2.3.1 ingress: enabled: true annotations: nginx.ingress.kubernetes.io/ssl-redirect: "true" nginx.ingress.kubernetes.io/backend-protocol: "HTTPS" hosts: - k8s.example.com tls: - secretName: example-com-tls-secret hosts: - k8s.example.com metricsScraper: enabled: true

先创建存放k8s.example.comssl证书的secret:

kubectl create secret tls example-com-tls-secret \ --cert=cert.pem \ --key=key.pem \ -n kube-system

使用helm部署dashboard:

helm install kubernetes-dashboard kubernetes-dashboard/kubernetes-dashboard \ -n kube-system \ -f values.yaml

上面部署出现了错误:

Error: unable to build kubernetes objects from release manifest: unable to recognize "": no matches for kind "Ingress" in version "networking.k8s.io/v1beta1"

这是因为networking.k8s.io/v1beta1版本的API已经在k8s 1.22中废弃了，而当前https://kubernetes.github.io/dashboard/这个helm chart中还没有更新，还是使用的旧版的API。 因此这里重新修改values.yaml，先不使用helm创建dashbaord的ingress资源:

image: repository: kubernetesui/dashboard tag: v2.3.1 ingress: enabled: false annotations: nginx.ingress.kubernetes.io/ssl-redirect: "true" nginx.ingress.kubernetes.io/backend-protocol: "HTTPS" hosts: - k8s.example.com tls: - secretName: example-com-tls-secret hosts: - k8s.example.com metricsScraper: enabled: true

再次使用helm部署dashboard:

helm install kubernetes-dashboard kubernetes-dashboard/kubernetes-dashboard \ -n kube-system \ -f values.yaml

此时可以部署成功，接下来手动编写yaml清单文件，创建dashboard的Ingress:

kubectl apply -f - <<EOF apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: kubernetes-dashboard namespace: kube-system annotations: nginx.ingress.kubernetes.io/ssl-redirect: "false" nginx.ingress.kubernetes.io/backend-protocol: "HTTPS" spec: ingressClassName: nginx tls: - hosts: - k8s.example.com secretName: example-com-tls-secret rules: - host: k8s.example.com http: paths: - path: / pathType: Prefix backend: service: name: kubernetes-dashboard port: number: 443 EOF

创建管理员sa:

kubectl create serviceaccount kube-dashboard-admin-sa -n kube-system kubectl create clusterrolebinding kube-dashboard-admin-sa \ --clusterrole=cluster-admin --serviceaccount=kube-system:kube-dashboard-admin-sa


获取集群管理员登录dashboard所需token:

kubectl -n kube-system get secret | grep kube-dashboard-admin-sa-token kube-dashboard-admin-sa-token-rcwlb kubernetes.io/service-account-token 3 68s kubectl describe -n kube-system secret/kube-dashboard-admin-sa-token-rcwlb Name: kube-dashboard-admin-sa-token-rcwlb Namespace: kube-system Labels: <none> Annotations: kubernetes.io/service-account.name: kube-dashboard-admin-sa kubernetes.io/service-account.uid: fcdf27f6-f6f9-4f76-b64e-edc91fb1479b Type: kubernetes.io/service-account-token Data ==== namespace: 11 bytes token: eyJhbGciOiJSUzI1NiIsImtpZCI6IkYxWTd5aDdzYWsyeWJVMFliUUhJMXI4YWtMZFd4dGFDT1N4eEZoam9HLUEifQ.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.R3l19_Nal4B2EktKFSJ7CgOqAngG_MTgzHRRjWdREN7dLALyfiRXYIgZQ90hxM-a9z2sPXBzfJno4OGP4fPX33D8h_4fgxfpVLjKqjdlZ_HAks_6sV9PBzDNXb_loNW8ECfsleDgn6CZin8Vx1w7sgkoEIKq0H-iZ8V9pRV0fTuOZcB-70pV_JX6H6WBEOgRIAZswhAoyUMvH1qNl47J5xBNwKRgcqP57NCIODo6FiClxfY3MWo2vz44R5wYCuBJJ70p6aBWixjDSxnp5u9mUP0zMF_igICl_OfgKuPyaeuIL83U8dS5ovEwPPGzX5mHUgaPH7JLZmKRNXJqLhTweA ca.crt: 1066 bytes

使用上面的token登录k8s dashboard。



kubernetes调整策略（使用kubeadm部署Kubernetes1.22）(1)

参考
  • Installing kubeadm
  • Creating a cluster with kubeadm
  • https://github.com/containerd/containerd
  • https://pkg.go.dev/k8s.io/kubernetes/cmd/kubeadm/app/apis/kubeadm/v1beta2
  • https://docs.projectcalico.org/

网站首页

返回栏目

猜您喜欢：

相关文章